+20 109 999 2979sales@infisolar.netVilla 603, 1st Settlement, New Cairo
infisolar.net / Machines

Machines

Eight crawler and wheeled models with 4–8 m masts, full specifications and a PDF catalogue per model.

Model code system

Every model code reads its key specifications:

IS - 55 - 91Y (-W)
  • ISInfiSolar
  • 55Mast length in metres (55 = 5.5 m)
  • 91Engine power in kW
  • YFirst letter of the engine brand (Y = Yuchai, C = Cummins)
  • -WWheeled version where applicable

Support equipment

DTH rigs, air compressors and spare parts for rocky ground and remote sites.

DTH drilling rigs

DTH drilling rigs

Pre-drilling in rocky ground, 90–400 mm, ahead of driving.

Diesel air compressors

Diesel air compressors

Towable screw compressors to power DTH hammers on remote sites.

Spare parts & accessories

Spare parts & accessories

Drill rods, auger heads, hydraulic hammers, pile caps.

Compare

Compare the models side by side

The same figures published on each machine page. Tap a model for details and the catalogue.

Swipe the table sideways to see all models →

ModelIS-55-91YIS-60-91YIS-80-91YIS-55-91Y-WIS-45-75CIS-40-91YIS-40-52CIS-40-75C-GPS
Mast length5.5 m6.0 m8.0 m5.5 m4.5 m4.0 m4.0 m4.0 m
Engine power91 kW — Yuchai91 kW — Yuchai91 kW — Yuchai91 kW — Yuchai75 kW — Cummins91 kW — Yuchai52 kW — ChangChai75 kW — Cummins 4BT3.9
Drilling depth5.0 m5.5 m7.5 m5.0 m4.0 m3.5 m3.5 m3.5 m
Drilling diameter50–400 mm50–400 mm50–400 mm50–400 mm50–300 mm50–400 mm50–300 mm50–300 mm
Hammer energy1,260 / 1,460 J1,260 / 1,460 J1,260 / 1,460 J1,500 J1,260 / 1,460 J1,260 / 1,460 J1,260 J1,260 J
Operating weight6,300 kg6,800 kg8,300 kg7,200 kg4,500 kg6,000 kg4,000 kg5,000 kg
Travel speed0–3 km/h0–3 km/h0–3 km/h20 km/h0–2.5 km/h0–3 km/h0–3 km/h70 / 35 m/min
Climbing ability≤ 30°≤ 30°< 58 %≤ 25°30°≤ 30°≤ 30°± 18°

Get a quote

Send the approximate number of piles, soil type, project location and duration, and we reply with a technical and commercial offer within 24 hours.

+20 109 999 2979sales@infisolar.net
WhatsAppCall now